甜橘子，专注成都网站制作网站设计与营销型网站建设与优化
QQ :532337155
电话：028-86922220
本篇内容主要讲解“android如何实现滑动解锁”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“android如何实现滑动解锁”吧!
企业建站必须是能够以充分展现企业形象为主要目的，是企业文化与产品对外扩展宣传的重要窗口，一个合格的网站不仅仅能为公司带来巨大的互联网上的收集和信息发布平台，创新互联建站面向各种领域：成都iso认证等网站设计、营销型网站解决方案、网站设计等建站排名服务。
效果图
需要用到的画笔， 整体灰色的背景， 滑块， 滑动之后绿色背景， 字体
mSliPaint = new Paint();
mSliPaint.setColor(Color.parseColor("#4a4c5b"));
mSliPaint.setAntiAlias(true);
mBgPaint = new Paint();
mBgPaint.setColor(Color.parseColor("#a6a6a6"));
mBgPaint.setAntiAlias(true);
mBluePaint = new Paint();
mBluePaint.setColor(Color.parseColor("#009496"));
mBluePaint.setAntiAlias(true);
mPaint = new Paint();
mPaint.setColor(Color.WHITE);
mPaint.setTextSize(mTextSize);
//该方法即为设置基线上那个点究竟是left,center,还是right
mPaint.setTextAlign(Paint.Align.LEFT);在onDraw中绘制 mMovex为手指滑动的X坐标
@Override
protected void onDraw(Canvas canvas) {
super.onDraw(canvas);
//背景色
RectF oval = new RectF(margin, margin, width - margin, height - margin);// 设置个新的长方形
canvas.drawRect(oval,mBgPaint);
//划过去背景色
RectF ovalBlue= new RectF(margin,margin,mMoveX+margin,mR*2+margin*3);
canvas.drawRect(ovalBlue,mBluePaint);
//文字
Paint.FontMetrics fontMetrics = mPaint.getFontMetrics();
float top = fontMetrics.top;//为基线到字体上边框的距离
float bottom = fontMetrics.bottom;//为基线到字体下边框的距离
int baseLineY = (int) (height / 2 - top / 2 - bottom / 2);//基线中间点的y轴计算公式
canvas.drawText(mText, mTextLeft, baseLineY, mPaint);
//滑块
RectF oval2 = new RectF(mMoveX+margin,margin,mMoveX+mR*3+margin*3,mR*2+margin*3);// 设置个新的长方形
canvas.drawRect(oval2,mSliPaint);//方形
//三个小箭头
Bitmap bitmap = BitmapFactory.decodeResource(this.getContext().getResources(), R.mipmap.arrow_right_small);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2-15,mR-margin,mSliPaint);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2,mR-margin,mSliPaint);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2+15,mR-margin,mSliPaint);
}onTouch中进行滑动监听 负值
@Override
public boolean onTouchEvent(MotionEvent event) {
// Log.e(event.getAction()+"");
// 点击是否在滑块上
if (event.getAction() != MotionEvent.ACTION_DOWN
&& !mSliderRect.contains((int) mStartX, (int) mStartY)) {
if (event.getAction() == MotionEvent.ACTION_UP
|| event.getAction() == MotionEvent.ACTION_CANCEL) {
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
return super.onTouchEvent(event);
}
acquireVelocityTrackerAndAddMovement(event);
switch (event.getAction()) {
case MotionEvent.ACTION_DOWN:
mStartX = event.getX();
mStartY = event.getY();
mLastX = mStartX;
mHandler.removeMessages(MSG_REDRAW);
// L.e("按下");
Log.e("SlideU","按下");
break;
case MotionEvent.ACTION_MOVE:
Log.e("SlideU","移动");
mLastX = event.getX();
if (mLastX > mStartX) {
if (mLastX - mStartX > mSlidableLength) {
mLastX = mStartX + mSlidableLength;
mMoveX = mSlidableLength;
} else {
mMoveX = (int) (mLastX - mStartX);
}
} else {
mLastX = mStartX;
mMoveX = 0;
}
invalidate();
break;
case MotionEvent.ACTION_UP:
case MotionEvent.ACTION_CANCEL:
Log.e("SlideU","超出或抬起");
mVelocityTracker.computeCurrentVelocity(1000, mMaxVelocity);
float velocityX = mVelocityTracker.getXVelocity();
Log.e("SlideU","速度"+velocityX);
if (mLastX - mStartX > mEffectiveLength || velocityX/2 > mEffectiveVelocity) {
startAnimator(mLastX - mStartX, mSlidableLength, velocityX, true);
} else {
startAnimator(mLastX - mStartX, 0, velocityX, false);
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
releaseVelocityTracker();
break;
}
return super.onTouchEvent(event);
}整体代码
public class LoadAwaySlideUnlockView extends View {
public interface UnlockListener {
void onLoadAwayUnlock();
}
private UnlockListener mUnlockListener;
public void setUnlockListener(UnlockListener unlockListener) {
mUnlockListener = unlockListener;
}
private static final int MSG_REDRAW = 1;
private static final int DRAW_INTERVAL = 50;
private static final int STEP_LENGTH = 10;//速度
private Paint mPaint;//文字的画笔
private Paint mSliPaint;//滑块画笔
private Paint mBgPaint;//背景画笔
private Paint mBluePaint;//划过去之后蓝色背景的画笔
private VelocityTracker mVelocityTracker;//滑动速度
private int mMaxVelocity;
private LinearGradient mGradient;//渐变色
private LinearGradient bgGradient;//背景渐变色
// private LinearGradient sliGradient;//滑块渐变色
// LinearGradient有两个构造函数;
//
// public LinearGradient(float x0, float y0, float x1, float y1, int[] colors, float[] positions,Shader.TileMode tile)
//
// 参数:
//
// float x0: 渐变起始点x坐标
//
// float y0:渐变起始点y坐标
//
// float x1:渐变结束点x坐标
//
// float y1:渐变结束点y坐标
//
// int[] colors:颜色 的int 数组
//
// float[] positions: 相对位置的颜色数组,可为null, 若为null,可为null,颜色沿渐变线均匀分布
//
// Shader.TileMode tile: 渲染器平铺模式
//
//
//
// public LinearGradient(float x0, float y0, float x1, float y1, int color0, int color1,Shader.TileMode tile)
//
// float x0: 渐变起始点x坐标
//
// float y0:渐变起始点y坐标
//
// float x1:渐变结束点x坐标
//
// float y1:渐变结束点y坐标
//
// int color0: 起始渐变色
// int color1: 结束渐变色
//
// Shader.TileMode tile: 渲染器平铺模式
private int[] mGradientColors;
private int[] bgGradientColors;
private int mGradientIndex;
private Interpolator mInterpolator;
private float mDensity;
private Matrix mMatrix;
private ValueAnimator mValueAnimator;
private int width;
private int height;
private String mText;//文字
private int mTextSize;//文字大小
private int mTextLeft;//文字距离左边
private int mR;//滑块的半径
private float margin;
private Rect mSliderRect;
private int mSlidableLength; // SlidableLength = BackgroundWidth - LeftMagins - RightMagins - SliderWidth
private int mEffectiveLength; // Suggested length is 20pixels shorter than SlidableLength
private float mEffectiveVelocity = 1000;//滑块自动回滚的速度
private float mStartX;
private float mStartY;
private float mLastX;
private float mMoveX;
public LoadAwaySlideUnlockView(Context context) {
this(context, null);
}
public LoadAwaySlideUnlockView(Context context, AttributeSet attrs) {
this(context, attrs, 0);
}
public LoadAwaySlideUnlockView(Context context, AttributeSet attrs, int defStyleAttr) {
this(context, attrs, defStyleAttr, 0);
}
public void setText(String text){
mText = text;
}
public LoadAwaySlideUnlockView(Context context, AttributeSet attrs, int defStyleAttr, int defStyleRes) {
super(context, attrs, defStyleAttr, defStyleRes);
mDensity = getResources().getDisplayMetrics().density;
ViewConfiguration configuration = ViewConfiguration.get(context);
mMaxVelocity = configuration.getScaledMaximumFlingVelocity();
mInterpolator = new AccelerateDecelerateInterpolator();
setClickable(true);
setFocusable(true);
setFocusableInTouchMode(true);
mSlidableLength = 200;
mTextSize = 30;//文字大小
mTextLeft = 10;//文字距离左边
mMoveX = 0;
mGradientIndex = 0;
mSliPaint = new Paint();
mSliPaint.setColor(Color.parseColor("#4a4c5b"));
mSliPaint.setAntiAlias(true);
mBgPaint = new Paint();
mBgPaint.setColor(Color.parseColor("#a6a6a6"));
mBgPaint.setAntiAlias(true);
mBluePaint = new Paint();
mBluePaint.setColor(Color.parseColor("#009496"));
mBluePaint.setAntiAlias(true);
mPaint = new Paint();
mPaint.setColor(Color.WHITE);
mPaint.setTextSize(mTextSize);
//该方法即为设置基线上那个点究竟是left,center,还是right
mPaint.setTextAlign(Paint.Align.LEFT);
// mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
int specWidthSize = MeasureSpec.getSize(widthMeasureSpec);//宽
int specHeightSize = MeasureSpec.getSize(heightMeasureSpec);//高
mMatrix = new Matrix();
width = specWidthSize;
height = specHeightSize;
mTextLeft = (int) (height * 1.5);
margin = height / 20;
mR = (int) (((height-margin*2) / 2)-margin);
//最大滑动距离
mSlidableLength = (int) (specWidthSize -(mMoveX+mR*3+margin*3-mMoveX+margin));
//有效距离
mEffectiveLength = mSlidableLength-20;
mSliderRect=new Rect((int)margin, (int)margin, 300, (int)(height - margin));
mGradientColors = new int[]{Color.argb(255, 120, 120, 120),
Color.argb(255, 120, 120, 120), Color.argb(255, 255, 255, 255)};
mGradient = new LinearGradient(0, 0, width/2, 0, mGradientColors,
new float[]{0, 0.7f, 1}, Shader.TileMode.MIRROR);
bgGradient = new LinearGradient(
0, 0, 0, (float) ((height)/2.0),
Color.argb(80, 0X77, 0X77, 0X77), Color.argb(200, 0X11, 0X11, 0X11),
Shader.TileMode.CLAMP
);
mHandler.removeMessages(MSG_REDRAW);
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
@Override
protected void onDraw(Canvas canvas) {
super.onDraw(canvas);
//背景色
RectF oval = new RectF(margin, margin, width - margin, height - margin);// 设置个新的长方形
canvas.drawRect(oval,mBgPaint);
//划过去背景色
RectF ovalBlue= new RectF(margin,margin,mMoveX+margin,mR*2+margin*3);
canvas.drawRect(ovalBlue,mBluePaint);
//文字
Paint.FontMetrics fontMetrics = mPaint.getFontMetrics();
float top = fontMetrics.top;//为基线到字体上边框的距离
float bottom = fontMetrics.bottom;//为基线到字体下边框的距离
int baseLineY = (int) (height / 2 - top / 2 - bottom / 2);//基线中间点的y轴计算公式
canvas.drawText(mText, mTextLeft, baseLineY, mPaint);
//滑块
RectF oval2 = new RectF(mMoveX+margin,margin,mMoveX+mR*3+margin*3,mR*2+margin*3);// 设置个新的长方形
canvas.drawRect(oval2,mSliPaint);//方形
//三个小箭头
Bitmap bitmap = BitmapFactory.decodeResource(this.getContext().getResources(), R.mipmap.arrow_right_small);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2-15,mR-margin,mSliPaint);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2,mR-margin,mSliPaint);
canvas.drawBitmap(bitmap,mMoveX+(mMoveX+mR*3+margin*3-mMoveX)/2+15,mR-margin,mSliPaint);
}
public void reset() {
if (mValueAnimator != null) {
mValueAnimator.cancel();
}
mMoveX = 0;
mPaint.setAlpha(255);
mHandler.removeMessages(MSG_REDRAW);
mHandler.sendEmptyMessageDelayed(MSG_REDRAW,200);
}
@Override
public boolean onTouchEvent(MotionEvent event) {
// Log.e(event.getAction()+"");
// 点击是否在滑块上
if (event.getAction() != MotionEvent.ACTION_DOWN
&& !mSliderRect.contains((int) mStartX, (int) mStartY)) {
if (event.getAction() == MotionEvent.ACTION_UP
|| event.getAction() == MotionEvent.ACTION_CANCEL) {
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
return super.onTouchEvent(event);
}
acquireVelocityTrackerAndAddMovement(event);
switch (event.getAction()) {
case MotionEvent.ACTION_DOWN:
mStartX = event.getX();
mStartY = event.getY();
mLastX = mStartX;
mHandler.removeMessages(MSG_REDRAW);
// L.e("按下");
Log.e("SlideU","按下");
break;
case MotionEvent.ACTION_MOVE:
Log.e("SlideU","移动");
mLastX = event.getX();
if (mLastX > mStartX) {
if (mLastX - mStartX > mSlidableLength) {
mLastX = mStartX + mSlidableLength;
mMoveX = mSlidableLength;
} else {
mMoveX = (int) (mLastX - mStartX);
}
} else {
mLastX = mStartX;
mMoveX = 0;
}
invalidate();
break;
case MotionEvent.ACTION_UP:
case MotionEvent.ACTION_CANCEL:
Log.e("SlideU","超出或抬起");
mVelocityTracker.computeCurrentVelocity(1000, mMaxVelocity);
float velocityX = mVelocityTracker.getXVelocity();
Log.e("SlideU","速度"+velocityX);
if (mLastX - mStartX > mEffectiveLength || velocityX/2 > mEffectiveVelocity) {
startAnimator(mLastX - mStartX, mSlidableLength, velocityX, true);
} else {
startAnimator(mLastX - mStartX, 0, velocityX, false);
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
}
releaseVelocityTracker();
break;
}
return super.onTouchEvent(event);
}
private void startAnimator(float start, float end, float velocity, boolean isRightMoving) {
if (velocity < mEffectiveVelocity) {
velocity = mEffectiveVelocity;
}
int duration = (int) (Math.abs(end - start) * 1000 / velocity);
mValueAnimator = ValueAnimator.ofFloat(start, end);
mValueAnimator.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
@Override
public void onAnimationUpdate(ValueAnimator animation) {
mMoveX = (Float) animation.getAnimatedValue();
invalidate();
}
});
mValueAnimator.setDuration(duration);
mValueAnimator.setInterpolator(mInterpolator);
if (isRightMoving) {
mValueAnimator.addListener(new Animator.AnimatorListener() {
@Override
public void onAnimationStart(Animator animation) {
}
@Override
public void onAnimationEnd(Animator animation) {
// L.e("解锁");
Log.e("SlideU","解锁");
if (mUnlockListener != null) {
mUnlockListener.onLoadAwayUnlock();
}
}
@Override
public void onAnimationCancel(Animator animation) {
}
@Override
public void onAnimationRepeat(Animator animation) {
}
});
}
mValueAnimator.start();
}
private void acquireVelocityTrackerAndAddMovement(MotionEvent ev) {
if (mVelocityTracker == null) {
mVelocityTracker = VelocityTracker.obtain();
}
mVelocityTracker.addMovement(ev);
}
private void releaseVelocityTracker() {
if (mVelocityTracker != null) {
mVelocityTracker.recycle();
mVelocityTracker = null;
}
}
private Handler mHandler = new Handler() {
public void handleMessage(Message msg) {
super.handleMessage(msg);
switch (msg.what) {
case MSG_REDRAW:
if(mMatrix==null){
mMatrix = new Matrix();
}
mMatrix.setTranslate(mGradientIndex, 0);
if(mGradient==null){
// L.e("mGradient空");
mGradientColors = new int[]{Color.argb(255, 120, 120, 120),
Color.argb(255, 120, 120, 120), Color.argb(255, 255, 255, 255)};
mGradient = new LinearGradient(0, 0, width/2, 0, mGradientColors,
new float[]{0, 0.7f, 1}, Shader.TileMode.MIRROR);
}
mGradient.setLocalMatrix(mMatrix);
invalidate();
mGradientIndex += STEP_LENGTH ;
if(mGradientIndex>=Integer.MAX_VALUE){
mGradientIndex = 0;
}
mHandler.sendEmptyMessageDelayed(MSG_REDRAW, DRAW_INTERVAL);
break;
}
}
};
}xml布局
activity中 添加提示文字和滑动监听即可
slideUnlock.setText("中间提示文字");
slideUnlock.setSlideListener(this);到此，相信大家对“android如何实现滑动解锁”有了更深的了解，不妨来实际操作一番吧！这里是创新互联网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！