ArduinoNRF24L01应用实例

Arduino(NANO) NRF24L01 应用实例

创新互联成立十年来，这条路我们正越走越好，积累了技术与客户资源，形成了良好的口碑。为客户提供网站建设、网站制作、网站策划、网页设计、申请域名、网络营销、VI设计、网站改版、漏洞修补等服务。网站是否美观、功能强大、用户体验好、性价比高、打开快等等，这些对于网站建设都非常重要，创新互联通过对建站技术性的掌握、对创意设计的研究为客户提供一站式互联网解决方案，携手广大客户，共同发展进步。

软件准备：
microBox 库(https://github.com/wastel7/microBox)：构建一个微型的命令行系统
Mirf 库(https://github.com/E-elektronic/Mirf)：提供RF相关的核心功能
以上库请自行下载

硬件准备：
Arduino NANO板 x 2; NRF24L01 x 2; Other;

开发环境：
VS2017 + Arduino IDE(1.8.4)

硬件连接：
Arduino NRF24L01 应用实例
Server、Client 与 NRF24L01模块的连接方式完全相同。接线次序：VCC:3.3V; GND:GND; CSN: 7; CE:8; MOSI:11; SCK:13; IRQ:不接; MISO:12;

Client 代码(client.ino)：

#include "microBox.h"

#pragma region UserDefined
#define DEBUG
//#undef    DEBUG

#ifndef FIRSWOF_ADD
#define FIRSWOF_ADD
#endif // !FIRSWOF_ADD

#ifdef FIRSWOF_ADD
/*
 * Hardware SPI:
 * MISO -> 12
 * MOSI -> 11
 * SCK -> 13
 *
 * Configurable:
 * CE -> 8
 * CSN -> 7
*/
#include 
#include "Mirf.h"
#include "nRF24L01.h"
#include "MirfHardwareSpiDriver.h"

//LED
#define RED_LED_PIN         2
#define GREEN_LED_PIN       3
#define BLUE_LED_PIN        4
#define LED_TRIGGER         HIGH

//BEEP
#define BEEP_PIN            5
#define BEEP_TRIGGER        LOW

uint8_t code[4] = { 0 };

void RedLedLight()
{
    digitalWrite(RED_LED_PIN, LED_TRIGGER);
    delay(50);
    digitalWrite(RED_LED_PIN, !LED_TRIGGER);
}

void GreenLedLight()
{
    digitalWrite(GREEN_LED_PIN, LED_TRIGGER);
    delay(50);
    digitalWrite(GREEN_LED_PIN, !LED_TRIGGER);
}

bool RfSend_Internal(uint8_t * data)
{
    unsigned long time = millis();

    Serial.print("cmd: ");
    Serial.print(data[0], HEX);
    Serial.print(" ");
    Serial.print(data[1], HEX);
    Serial.print(" ");
    Serial.print(data[2], HEX);
    Serial.print(" ");
    Serial.println(data[3], HEX);
    Mirf.setTADDR((byte *)"serv0");
    Mirf.send(data);
    while (Mirf.isSending()) 
    {
        if ((millis() - time) > 2000)
        {
            RedLedLight();
            Serial.println("timeout on send cmd!");
            return false;
        }
    }
    while (!Mirf.dataReady())
    {
        if ((millis() - time) > 2000)
        {
            RedLedLight();
            Serial.println("timeout on response from server!");
            return false;
        }
    }
    GreenLedLight();
    Mirf.getData(data);
    Serial.print("ack: ");
    Serial.print(data[0], HEX);
    Serial.print(" ");
    Serial.print(data[1], HEX);
    Serial.print(" ");
    Serial.print(data[2], HEX);
    Serial.print(" ");
    Serial.println(data[3], HEX);
}

void RfSend(char **param, uint8_t parCnt)
{
    if (parCnt == 1)
    {
        unsigned long uli = strtoul(param[0], 0, 16);
        code[3] = (uint8_t)(uli & 0xff);
        code[2] = (uint8_t)((uli & 0xff00)>>8);
        code[1] = (uint8_t)((uli & 0xff0000)>>16);
        code[0] = (uint8_t)((uli & 0xff000000)>>24);
        RfSend_Internal(code);
    }
    else
        Serial.println(F("Usage: rf-send hex-code(4 bytes), eg: rf-send AABBCCDD"));
}

void Test(char **param, uint8_t parCnt)
{
    if (parCnt == 0)
    {
        ;
    }
    else
        Serial.println(F("Usage: test"));
}

void UsrInit()
{
    pinMode(RED_LED_PIN, OUTPUT);
    pinMode(GREEN_LED_PIN, OUTPUT);
    pinMode(BLUE_LED_PIN, OUTPUT);
    digitalWrite(RED_LED_PIN, !LED_TRIGGER);
    digitalWrite(GREEN_LED_PIN, !LED_TRIGGER);
    digitalWrite(BLUE_LED_PIN, !LED_TRIGGER);

    Mirf.spi = &MirfHardwareSpi;
    Mirf.init();
    Mirf.setRADDR((byte *)"sndr0");
    Mirf.payload = sizeof(unsigned long);   //size:4
    //Mirf.channel = 10;
    Mirf.config();
}
#endif // FIRSWOF_ADD
#pragma endregion

#pragma region InternalFunc
char historyBuf[100];
char hostname[] = "tdxk";

PARAM_ENTRY Params[] =
{
  {"hostname", hostname, PARTYPE_STRING | PARTYPE_RW, sizeof(hostname), NULL, NULL, 0},
  {NULL, NULL}
};

void getMillis(char **param, uint8_t parCnt)
{
    Serial.println(millis());
}

void freeRam(char **param, uint8_t parCnt)
{
    extern int __heap_start, *__brkval;
    int v;
    Serial.println((int)&v - (__brkval == 0 ? (int)&__heap_start : (int)__brkval));
}

void writePin(char **param, uint8_t parCnt)
{
    uint8_t pin, pinval;
    if (parCnt == 2)
    {
        pin = atoi(param[0]);
        pinval = atoi(param[1]);
        digitalWrite(pin, pinval);
    }
    else
        Serial.println(F("Usage: writepin pinNum pinvalue"));
}

void readPin(char **param, uint8_t parCnt)
{
    uint8_t pin;
    if (parCnt == 1)
    {
        pin = atoi(param[0]);
        Serial.println(digitalRead(pin));
    }
    else
        Serial.println(F("Usage: readpin pinNum"));
}

void setPinDirection(char **param, uint8_t parCnt)
{
    uint8_t pin, pindir;
    if (parCnt == 2)
    {
        pin = atoi(param[0]);
        if (strcmp(param[1], "out") == 0)
            pindir = OUTPUT;
        else
            pindir = INPUT;

        pinMode(pin, pindir);
    }
    else
        Serial.println(F("Usage: setpindir pinNum in|out"));
}

void readAnalogPin(char **param, uint8_t parCnt)
{
    uint8_t pin;
    if (parCnt == 1)
    {
        pin = atoi(param[0]);
        Serial.println(analogRead(pin));
    }
    else
        Serial.println(F("Usage: readanalog pinNum"));
}

void writeAnalogPin(char **param, uint8_t parCnt)
{
    uint8_t pin, pinval;
    if (parCnt == 2)
    {
        pin = atoi(param[0]);
        pinval = atoi(param[1]);
        analogWrite(pin, pinval);
    }
    else
        Serial.println(F("Usage: writeanalog pinNum pinvalue"));
}
#pragma endregion

void setup()
{
  Serial.begin(115200);

  microbox.begin(&Params[0], hostname, true, historyBuf, 100);
  microbox.AddCommand("free", freeRam);
  microbox.AddCommand("millis", getMillis);
  microbox.AddCommand("readanalog", readAnalogPin);
  microbox.AddCommand("readpin", readPin);
  microbox.AddCommand("setpindir", setPinDirection);
  microbox.AddCommand("writeanalog", writeAnalogPin);
  microbox.AddCommand("writepin", writePin);

#ifdef FIRSWOF_ADD
  UsrInit();
  microbox.AddCommand("test", Test);
  microbox.AddCommand("rf-send", RfSend);
#endif // FIRSWOF_ADD
}

void loop()
{ 
  microbox.cmdParser();
}

Server 代码(Server.ino):

/**
 * An Mirf example which copies back the data it recives.
 *
 * Pins:
 * Hardware SPI:
 * MISO -> 12
 * MOSI -> 11
 * SCK -> 13
 *
 * Configurable:
 * CE -> 8
 * CSN -> 7
 *
 */

#include 
#include "Mirf.h"
#include "nRF24L01.h"
#include "MirfHardwareSpiDriver.h"

#define DEBUG
//#undef    DEBUG

#define BEEP_PIN        2
#define BEEP_TRIGGER    LOW
#define CHECKSUM        data[0]
#define DATA_SET_INTERNAL(x,y,m,n)  {/*data[0]=(uint8_t)x;*/data[1]=(uint8_t)y;data[2]=(uint8_t)m;data[3]=(uint8_t)n;}
#define SEND_DATA(x,y,m,n) {DATA_SET_INTERNAL(x,y,m,n);\
Serial.print("ack: ");\
Serial.print(data[0], HEX);\
Serial.print("  ");\
Serial.print(data[1], HEX);\
Serial.print("  ");\
Serial.print(data[2], HEX);\
Serial.print("  ");\
Serial.println(data[3], HEX);\
Mirf.send(data); }

//FLAG
#define ACK_OK      0xE0
#define ACK_NG      0xE1
#define ACK_ERROR   0xE2

unsigned long ulCode = 0ul;

void beep()
{
    digitalWrite(BEEP_PIN, BEEP_TRIGGER);
    delay(10);
    digitalWrite(BEEP_PIN, !BEEP_TRIGGER);
}

//CRC-8, Widh:8, Poly:0x07, Init: 0x00
//RefIn:False, RefOut:False, XorOut:0x00
byte CalcCRC8(byte * pdata, unsigned int len)
{
    byte crc = 0x00;

    for (int i = 0; i < len; i++)
    {
        crc ^= ((*pdata++) & 0xFF);
        for (byte j = 0; j < 8; j++)
        {
            if (crc & 0x80)
            {
                crc <<= 1;
                crc ^= 0x07;
            }
            else
            {
                crc <<= 1;
            }
        }
    }
    return crc;
}

void setup()
{
    pinMode(BEEP_PIN, OUTPUT);
    digitalWrite(BEEP_PIN, !BEEP_TRIGGER);
    Serial.begin(115200);
    Mirf.spi = &MirfHardwareSpi;
    Mirf.init();
    Mirf.setRADDR((byte *)"serv0");
    Mirf.payload = sizeof(unsigned long);
    Mirf.config();
    Serial.println("Listening..."); 
}

void loop()
{
    byte data[Mirf.payload];
    if (!Mirf.isSending() && Mirf.dataReady())
    {
        Mirf.getData(data);
        Serial.print("cmd: ");
        Serial.print(data[0], HEX);
        Serial.print("  ");
        Serial.print(data[1], HEX);
        Serial.print("  ");
        Serial.print(data[2], HEX);
        Serial.print("  ");
        Serial.println(data[3], HEX);
        Mirf.setTADDR((byte *)"sndr0");
        beep();
        ulCode = (unsigned long)((unsigned long)data[0]<<24|(unsigned long)data[1]<<16|(unsigned long)data[2]<<8|data[3]);
        CHECKSUM = CalcCRC8(data, Mirf.payload);
        switch (ulCode)
        {
        case 0x000000:
            SEND_DATA(CHECKSUM, ACK_OK, 0, 0);
            Serial.println("[case 0x000000]");
            break;
        case 0x00112233:
            SEND_DATA(CHECKSUM, ACK_OK, 0, 0);
            Serial.println("[case 0x00112233]");
            break;
        default:
            SEND_DATA(CHECKSUM, ACK_NG, 0, 0);
            Serial.println("[case default]");
            break;
        }
    }
}

测试图示：
Arduino NRF24L01 应用实例

文章标题：ArduinoNRF24L01应用实例
本文URL：http://chengdu.cdxwcx.cn/article/jigpph.html

甜橘子，专注成都网站制作网站设计与营销型网站建设与优化

首页

网站建设

网站制作案例

解决方案

网站设计报价

网站制作动态

关于我们

联系我们

成都网站建设设计将想法与焦点和您一起共享

ArduinoNRF24L01应用实例

其他资讯

php模板数据库 php数据库编程

php返回查询返回条数据 php查询数据库返回json

腾讯云如何更改服务器dns地址吗腾讯云域名dns怎么修改

腾讯云香港服务器不稳定腾讯香港云服务器一年多少钱

php采集j数据 php采集源码

甜橘子，专注成都网站制作网站设计与营销型网站建设与优化

成都网站建设设计 将想法与焦点和您一起共享

ArduinoNRF24L01应用实例

其他资讯

php模板数据库 php数据库编程

php返回查询返回条数据 php查询数据库返回json

腾讯云如何更改服务器dns地址吗 腾讯云域名dns怎么修改

腾讯云香港服务器不稳定 腾讯香港云服务器一年多少钱

php采集j数据 php采集源码

成都网站建设设计将想法与焦点和您一起共享

腾讯云如何更改服务器dns地址吗腾讯云域名dns怎么修改

腾讯云香港服务器不稳定腾讯香港云服务器一年多少钱