甜橘子，专注成都网站制作网站设计与营销型网站建设与优化
QQ :532337155
电话：028-86922220
Well now we sort of know the nature of packet capture, we have
identified that we do in fact have an interface to pull things from, how
about we go ahead and grab a packet!
"Just give me the damn example
and let me hack...", you cry
Very well..... Here you go.. download
from here.. testpcap1.c or just cut and paste
below.
创新互联建站是专业的钦北网站建设公司，钦北接单;提供网站设计制作、成都网站制作,网页设计,网站设计,建网站,PHP网站建设等专业做网站服务;采用PHP框架,可快速的进行钦北网站开发网页制作和功能扩展;专业做搜索引擎喜爱的网站,专业的做网站团队,希望更多企业前来合作!
/*************************************************** * file: testpcap1.c * * Simple single packet capture program *****************************************************/ #include#include #include /* 加入报错请尝试用 pcap/pcap.h */ #include #include #include #include #include /* 包含 net/ethernet.h */ int main(int argc, char **argv) { int i; char *dev; char errbuf[PCAP_ERRBUF_SIZE]; pcap_t* descr; const u_char *packet; struct pcap_pkthdr hdr; /* pcap.h */ struct ether_header *eptr; /* net/ethernet.h */ u_char *ptr; /* 打印输出硬件头信息 */ /* 抓取网卡 */ dev = pcap_lookupdev(errbuf); if(dev == NULL) { printf("%s\n",errbuf); exit(1); } printf("DEV: %s\n",dev); /* 打开网卡，准备监听 pcap_t *pcap_open_live(char *device,int snaplen, int promisc,int to_ms, char *ebuf) snaplen - 抓取的最大字节 promisc - 设置网卡为混杂模式 to_ms - 等待时间，单位 ms errbuf - 保存错误信息 Note if you change "prmisc" param to anything other than zero, you will get all packets your device sees, whether they are intendeed for you or not!! Be sure you know the rules of the network you are running on before you set your card in promiscuous mode!! 注意:如果你将网卡的模式从混杂模式改为任何一种其他模式，你将会监听到你的网卡能看到的所有数据包，无论是否是你想要的，再更新你网卡模式时，一定要确认你了解你正在使用网卡的知识 */ descr = pcap_open_live(dev,BUFSIZ,0,-1,errbuf); if(descr == NULL) { printf("pcap_open_live(): %s\n",errbuf); exit(1); } /* u_char *pcap_next(pcap_t *p,struct pcap_pkthdr *h) 从descr抓取一个数据包 */ packet = pcap_next(descr,&hdr); if(packet == NULL) { printf("Didn't grab packet\n"); exit(1); } /* pcap_pkthdr 结构体详解 struct pcap_pkthdr { struct timeval ts; ts是一个结构struct timeval，它有两个部分，第一部分是1900开始以来的秒数，第二部分是当前秒之后的毫秒数 bpf_u_int32 caplen; 表示抓到的数据长度 bpf_u_int32 len; 表示数据包的实际长度 } */ printf("Grabbed packet of length %d\n",hdr.len); printf("Recieved at ..... %s\n",ctime((const time_t*)&hdr.ts.tv_sec)); printf("Ethernet address length is %d\n",ETHER_HDR_LEN); /* 分析 ether 头部 */ eptr = (struct ether_header *) packet; /* 检查获取到数据包的类型 */ if (ntohs (eptr->ether_type) == ETHERTYPE_IP) { printf("Ethernet type hex:%x dec:%d is an IP packet\n", ntohs(eptr->ether_type), ntohs(eptr->ether_type)); }else if (ntohs (eptr->ether_type) == ETHERTYPE_ARP) { printf("Ethernet type hex:%x dec:%d is an ARP packet\n", ntohs(eptr->ether_type), ntohs(eptr->ether_type)); }else { printf("Ethernet type %x not IP", ntohs(eptr->ether_type)); exit(1); } /* copied from Steven's UNP */ ptr = eptr->ether_dhost; i = ETHER_ADDR_LEN; printf(" Destination Address: "); do{ printf("%s%x",(i == ETHER_ADDR_LEN) ? " " : ":",*ptr++); }while(--i>0); printf("\n"); ptr = eptr->ether_shost; i = ETHER_ADDR_LEN; printf(" Source Address: "); do{ printf("%s%x",(i == ETHER_ADDR_LEN) ? " " : ":",*ptr++); }while(--i>0); printf("\n"); return 0; }
Well, that wasn't too bad was it?! Lets give her a test run ..
[root@pepe libpcap]# ./a.out DEV: eth0 Grabbed packet of length 76 Recieved at time..... Mon Mar 12 22:23:29 2001 Ethernet address length is 14 Ethernet type hex:800 dec:2048 is an IP packet Destination Address: 0:20:78:d1:e8:1 Source Address: 0:a0:cc:56:c2:91 [root@pepe libpcap]#
After typing a.outI jumped into another terminal and tried to
ping www.google.com. The output captured the ICMP packet used to ping
www.google.com. If you don't know exactly what goes on under the covers
of a network you may be curios how the computer obtained the destination
ethernet address. Aha! You don't actually think that the destination
address of the ethernet packet is the same as the machine at www.google.com
do you!?
The destination address is the next hop address of the packet, most
likely your network gateway ... aka the computer that ties your network
to the internet. The packet must first find its way to your gateway
which will then forward it to the next hop based on ist routing table.
Lets do a quick sanity check to see if we in fact are sending to the
gateway .... You can use the routecommand to look at your local
computer's routing table. The routing table will tell you the next hop
for each destination. The last entry (default) is for all packets not
sent locally (127 subnet) or to the 192.16.1 subnet. These packets are
forwarded to 192.168.1.1.
[root@pepe libpcap]# /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
we can then use the arpcommand determine the hardware address for 192.168.1.1.
[root@pepe libpcap]# /sbin/arp Address HWtype HWaddress Flags Mask Iface 192.168.1.1 ether 00:20:78:D1:E8:01 C eth0
If your gateway is not in your arp cache, try and ping it, and then retry the arp command. The point is this, in order for your computer to send the packet it must first get the MAC address of the next hop (00:20:78:D1:E8:01 for my network).
An obvious follow-up question is, "how did my computer know the gateway hardware address"? Let me then digress for a moment. My computer knows the IP address of the gateway. As you can see from the handy-dandyarpcommand there is an internal table (the arp cache) which maps IP addresses to hardware addresses.
Hardware addresses on ethernet are obtained using the Address Resolution Protocol or ARP. ARP is is described in RFC826 which can be found... Here! It works as follows. If my computer wants to know the hardware address for the computer with IP 1.2.3.4, it sends and ARP request packet to Ethernet broadcast out of the Interface which 1.2.3.4. as attached. All computers connected to this interface (including 1.2.3.4) should recevie the packet and process the requests. However, only 1.2.3.4 should issue a reply which will contain its Ethernet address. On receipt of the reply, my computer will "cache" out the hardware address for all subsequent packets sent to 1.2.3.4 (until the cache entry times out). ARP packets are of Thernet type...ETHERTYPE_ARPwhich is defined in net/ethernet.h as follows.
#define ETHERTYPE_ARP 0x0806 /* Address resolution */
You can force an Ethernet ARP request by clearing your computer's ARP cache. Below I do this, and then run the above program again to grab the outgoing ARP request.
[root@pepe libpcap]# /sbin/arp -n # look at arp cache Address HWtype HWaddress Flags Mask Iface 192.168.1.1 ether 00:20:78:D1:E8:01 C eth0 [root@pepe libpcap]# /sbin/arp -n -d 192.168.1.1 #delete gateqay entrance [root@pepe libpcap]# /sbin/arp -n #make sure gateway hardware addy is empty Address HWtype HWaddress Flags Mask Iface 192.168.1.1 (incomplete) eth0 [root@pepe libpcap]# ./a.out DEV: eth0 Grabbed packet of length 42 Recieved at time..... Tue Mar 13 00:36:49 2001 Ethernet address length is 14 Ethernet type hex:806 dec:2054 is an ARP packet Destination Address: ff:ff:ff:ff:ff:ff Source Address: 0:a0:cc:56:c2:91 [root@pepe libpcap]
So as you can see, once the hardware address was removed the the cache, my computer needed to send an arp request to broadcast (i.e. ff:ff:ff:ff:ff:ff) looking for the owner of the higher level address, in this case IP 192.168.1.1. What do you think would happen if you cleared your arp cache and modified testpcap1.c to capture 2 packets?! Hey I know why don't you try it :-P~~~~
Lets now disect the packet by checking out
/* 10Mb/s ethernet header */
struct ether_header
{
u_int8_t ether_dhost[ETH_ALEN]; /* destination eth addr */
u_int8_t ether_shost[ETH_ALEN]; /* source ether addr */
u_int16_t ether_type; /* packet type ID field */
} __attribute__ ((__packed__));So it looks like the first ETH_ALEN bytes are the destination ethernet address (look at linux/if_ether.h for the definition of ETH_ALEN :-) of the packet (presumedly your machine). The next ETH_ALEN bytes are the source. Finally, the last word is the packet type. Here are the protocol ID's on my machine from net/ethernet.h
/* Ethernet protocol ID's */ #define ETHERTYPE_PUP 0x0200 /* Xerox PUP */ #define ETHERTYPE_IP 0x0800 /* IP */ #define ETHERTYPE_ARP 0x0806 /* Address resolution */ #define ETHERTYPE_REVARP 0x8035 /* Reverse ARP */
For the purpose of this tutorial I will be focusing on IP and perhaps a little bit on ARP... the truth is I have no idea what the hell Xerox PUP is.
Allright so where are we now? We know the most basic of methods for grabbing a packet. We covered how hardware addresses are resolved and what a basic ethernet packet looks like. Still we are using a ver small subset of the functionality of libpcap, and we haven't even begun to peer into the packets themselves (other than the hardware headers) so much to do and so little time :-) As you can probably tell by now, it would be near impossible to do any real protocol analysis with a program that simply captures one packet at a time. What we really want to do is write a simple packet capturing engine that will nab as many packets as possible while filtering out those we dont want. In the next section we will construct a simple packet capturing engine which will aid us in packet dissection later on.