甜橘子，专注成都网站制作网站设计与营销型网站建设与优化
QQ :532337155
电话：028-86922220
Centos7中怎么安装Scrapy，很多新手对此不是很清楚，为了帮助大家解决这个难题，下面小编将为大家详细讲解，有这方面需求的人可以来学习下，希望你能有所收获。
网站建设哪家好，找成都创新互联公司！专注于网页设计、网站建设、微信开发、微信小程序、集团企业网站建设等服务项目。为回馈新老客户创新互联还提供了黔西免费建站欢迎大家使用！
一、安装开发包组、升级操作系统
#yum groupinstall "Development Tools" -y #yum update -y
注：
1、如果你的系统上的python不是python2.7以上版本请升级到python2.7以上版本（由于Scrapy 需要python 2.7 以上的版本）
#下载python2.7
#wget http://python.org/ftp/python/2.7.3/Python-2.7.3.tar.bz2
#解压
#tar -jxvf Python-2.7.3.tar.bz2 #cd Python-2.7.3
#安装
#./configure #make all #make install #make clean #make distclean
#查看python 版本
#/usr/local/bin/python2.7 -V
#建立软连接，使系统默认的 python指向 python2.7
#mv /usr/bin/python /usr/bin/python2.6.6 #ln -s /usr/local/bin/python2.7 /usr/bin/python
#解决系统 Python 软链接指向 Python2.7 版本后，因为yum是不兼容 Python 2.7的，所以yum不能正常工作，我们需要指定 yum 的Python版本
vim /usr/bin/yum
将文件头部的
#!/usr/bin/python
改成
#!/usr/bin/python2.6.6
2、强烈建议升级python2.7后再安装pip与setuptools,如果不这样操作会出现很多莫明的问题，让你酸爽到天明！！
3、如果你是升级到python2.7，更大的可能性是全部通过python setup.py 编译安装，所需要的包含但不限于这些包
lxml,zope.interface,Twisted,characteristic,pyasn1-modules,service-identity,Scrapy
PS:我一开始就是编译安装的，其中最多的问题是:
error:command 'gcc' failed with exit status 1
后来我发现，如果有这样的提示不是缺少devel包就是少某一个lib库文件;最令我哭笑不得是安装Scrapy 提示成功，但无法创建项目，测试样例都跑不了，最终我果断的换centos7了！
二、vim /etc/yum.repo/rpmforge.repo 指定rpmforge,来安装liffi-devel【如果不指定源，yum install liffi-devel会提示没有找到】，原博文中的方法不能用，自己又搜索了方案，使用下面代码覆盖上面打开的文件
#Name: RPMforge RPM Repository for Red Hat Enterprise 5 - dag #URL: http://rpmforge.net/ [rpmforge] name = Red Hat Enterprise $releasever - RPMforge.net - dag #baseurl = http://apt.sw.be/redhat/el5/en/$basearch/dag mirrorlist = http://apt.sw.be/redhat/el5/en/mirrors-rpmforge #mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge enabled = 1 protect = 0 gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag gpgcheck = 1
运行下面命令
sudo rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt sudo yum install libffi-devel
原解决方案：http://www.lxway.com/164125081.htm
注：没有rpmforge的需要先安装
rpmforge是Dag、Dries 和其它软件包的组合。它们为 CentOS 提供了超过10000个软件包。rpmforge不是redhat Linux产品或 CentOS 的组成部分，但它是为这些 Linux 套件而设计的。
注释：因为这个安装源不是CentOS 本身的组成部分，要使用rpmforge，必须先安装rpmforce这个Repository。
获取方式：
#32位：
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.1-1.el5.rf.i386.rpm rpm -ivh rpmforge-release-0.5.1-1.el5.rf.i386.rpm
#64位：
wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
安装：
rpm -ivh rpmforge-release-0.5.1-1.el5.rf.x86_64.rpm
安装好之后在/etc/yum.repos.d 目录下面生成：
mirrors-rpmforge --包含一系列的镜像站点
rpmforge.repo --yum源的配置文件
rpmforge-testing.repo --测试用的。
三、如果系统中安装有audit这个包请先移除，它会影响到Scrapy的安装
#yum remove audit
四、安装Scarpy 所需要的开发包
#yum install -y python-devel openssl-devel libxslt-devel libxml2-devel
五、安装pip与setuptools
#yum install python-pip -y
显示没有可用源：
这是因为像centos这类衍生出来的发行版，他们的源有时候内容更新的比较滞后，或者说有时候一些扩展的源根本就没有。所以在使用yum来search python-pip的时候，会说没有找到该软件包。因此为了能够安装这些包，需要先安装扩展源EPEL。EPEL(http://fedoraproject.org/wiki/EPEL) 是由 Fedora 社区打造，为 RHEL 及衍生发行版如 CentOS、Scientific Linux 等提供高质量软件包的项目。
首先安装epel扩展源：
sudo yum -y install epel-release
然后安装python-pip
sudo yum -y install python-pip
安装完之后别忘了清除一下cache
sudo yum clean all
#pip install setuptools #pip install setuptoos --upgrade
六、安装Scrapy
# pip install Scrapy
Collecting Scrapy
Using cached Scrapy-1.0.3-py2-none-any.whl
Requirement already satisfied (use --upgrade to upgrade): cssselect>=0.9 in /usr/lib/python2.7/site-packages (from Scrapy)
Requirement already satisfied (use --upgrade to upgrade): queuelib in /usr/lib/python2.7/site-packages (from Scrapy)
Requirement already satisfied (use --upgrade to upgrade): pyOpenSSL in /usr/lib/python2.7/site-packages (from Scrapy)
Requirement already satisfied (use --upgrade to upgrade): w3lib>=1.8.0 in /usr/lib/python2.7/site-packages (from Scrapy)
Collecting lxml (from Scrapy)
Using cached lxml-3.4.4.tar.gz
Collecting Twisted>=10.0.0 (from Scrapy)
Using cached Twisted-15.4.0.tar.bz2
Requirement already satisfied (use --upgrade to upgrade): six>=1.5.2 in /usr/lib/python2.7/site-packages (from Scrapy)
Collecting service-identity (from Scrapy)
Using cached service_identity-14.0.0-py2.py3-none-any.whl
Requirement already satisfied (use --upgrade to upgrade): cryptography>=0.7 in /usr/lib64/python2.7/site-packages (from pyOpenSSL->Scrapy)
Collecting zope.interface>=3.6.0 (from Twisted>=10.0.0->Scrapy)
Using cached zope.interface-4.1.3.tar.gz
Collecting characteristic>=14.0.0 (from service-identity->Scrapy)
Using cached characteristic-14.3.0-py2.py3-none-any.whl
Collecting pyasn1-modules (from service-identity->Scrapy)
Using cached pyasn1_modules-0.0.8-py2.py3-none-any.whl
Requirement already satisfied (use --upgrade to upgrade): pyasn1 in /usr/lib/python2.7/site-packages (from service-identity->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): idna>=2.0 in /usr/lib/python2.7/site-packages (from cryptography>=0.7->pyOpenSSL->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): setuptools in /usr/lib/python2.7/site-packages (from cryptography>=0.7->pyOpenSSL->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): enum34 in /usr/lib/python2.7/site-packages (from cryptography>=0.7->pyOpenSSL->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): ipaddress in /usr/lib/python2.7/site-packages (from cryptography>=0.7->pyOpenSSL->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): cffi>=1.1.0 in /usr/lib64/python2.7/site-packages (from cryptography>=0.7->pyOpenSSL->Scrapy)
Requirement already satisfied (use --upgrade to upgrade): pycparser in /usr/lib/python2.7/site-packages (from cffi>=1.1.0->cryptography>=0.7->pyOpenSSL->Scrapy)
Installing collected packages: lxml, zope.interface, Twisted, characteristic, pyasn1-modules, service-identity, Scrapy
Running setup.py install for lxml
Running setup.py install for zope.interface
Running setup.py install for Twisted
Successfully installed Scrapy-1.0.3 Twisted-15.4.0 characteristic-14.3.0 lxml-3.4.4 pyasn1-modules-0.0.8 service-identity-14.0.0 zope.interface-4.1.3
七、创建项目
[root@localhost workspace]
# scrapy startproject tutorial
2015-10-15 21:54:24 [scrapy] INFO: Scrapy 1.0.3 started (bot: scrapybot)
2015-10-15 21:54:24 [scrapy] INFO: Optional features available: ssl, http11
2015-10-15 21:54:24 [scrapy] INFO: Overridden settings: {}
New Scrapy project 'tutorial' created in:
/workspace/tutorial
You can start your first spider with:
cd tutorial
scrapy genspider example example.com
八、目录结构
[root@localhost workspace]
# tree
.
└── tutorial
├── scrapy.cfg
└── tutorial
├── __init__.py
├── items.py
├── pipelines.py
├── settings.py
└── spiders
└── __init__.py
看完上述内容是否对您有帮助呢？如果还想对相关知识有进一步的了解或阅读更多相关文章，请关注创新互联行业资讯频道，感谢您对创新互联的支持。