1.安装ntp ntpdate

创新互联建站专注于比如企业网站建设,成都响应式网站建设公司,电子商务商城网站建设。比如网站建设公司,为比如等地区提供建站服务。全流程定制网站，专业设计，全程项目跟踪，创新互联建站专业和态度为您提供的服务

yum install -y ntp ntpdate

2.修改配置文件

#备份配置文件
cp /etc/ntp.conf /etc/ntp.conf-bak
#修改配置文件
vi /etc/ntp.conf
#配置文件内容为

# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1 
restrict ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
restrict 10.0.0.0 mask 255.0.0.0 nomodify notrap
restrict 172.16.0.0 mask 255.240.0.0 nomodify notrap
service 10.0.0.254

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
server ntp.ntsc.ac.cn iburst
server 0.centos.pool.ntp.org iburst
server 1.centos.pool.ntp.org iburst
server 2.centos.pool.ntp.org iburst
server 3.centos.pool.ntp.org iburst

#broadcast 192.168.1.255 autokey        # broadcast server
#broadcastclient                        # broadcast client
#broadcast 224.0.1.1 autokey            # multicast server
#multicastclient 224.0.1.1              # multicast client
#manycastserver 239.255.254.254         # manycast server
#manycastclient 239.255.254.254 autokey # manycast client

# Enable public key cryptography.
#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography. 
keys /etc/ntp/keys

# Specify the key identifiers which are trusted.
#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.
#requestkey 8

# Specify the key identifier to use with the ntpq utility.
#controlkey 8

# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats

# Disable the monitoring facility to prevent amplification attacks using ntpdc
# monlist command when default restrict does not include the noquery flag. See
# CVE-2013-5211 for more details.
# Note: Monitoring will not be disabled with the limited restriction flag.
disable monitor

3.启动NTP

systemctl start ntpd.service

4.将NTP加入开机启动

chkconfig ntpd on

5.查看NTP服务状态

ntpq -p

6.开启防火墙

firewall-cmd --add-service=ntp
firewall-cmd --permanent --add-service=ntp

文章标题：Linux搭建NTP服务器
转载来于：http://chengdu.cdxwcx.cn/article/ghippp.html