1、集群信息
10年积累的网站设计制作、成都网站建设经验，可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你，你也不认识我。但先网站制作后付款的网站建设流程，更有港口免费网站建设让你可以放心的选择与我们合作。
[root@es3 local]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.56.14 es1
192.168.56.15 es2
192.168.56.16 es3
2、MySQL配置：
[root@es3 local]# grep -v ^# /etc/my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
symbolic-links=0
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
server_id = 3
log-bin=mysqlbin
binlog_format = row
log_slave_updates = 1
enforce_gtid_consistency = ON
gtid_mode = ON
slave-parallel-type=LOGICAL_CLOCK
slave-parallel-workers=16
master_info_repository=TABLE
relay_log_info_repository=TABLE
relay_log_recovery=ON
rpl_semi_sync_master_enabled = 1
rpl_semi_sync_master_timeout = 1000
rpl_semi_sync_slave_enabled = 1
[root@es3 local]#
3、app1.cnf信息
[root@es3 ~]# cat app1.cnf
[server default]
master_ip_failover_script=/usr/local/bin/master_ip_failover
master_ip_online_change_script= /usr/local/bin/master_ip_online_change
report_script=/usr/local/bin/send_report
shutdown_script=/usr/local/bin/power_manager
user=repl
password=123456
ssh_user=root
manager_workdir=/data/manager
remote_workdir=/tmp
repl_user=repl
repl_password=123456
secondary_check_script=masterha_secondary_check -s 192.168.56.16 -s 192.168.56.15
[server1]
hostname=es1
port=3306
[server2]
hostname=es2
port=3306
[server3]
hostname=es3
port=3306
[root@es3 ~]#
4、master_ip_failover脚本
#!/usr/bin/env perl
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
my (
$command, $ssh_user, $orig_master_host, $orig_master_ip,
$orig_master_port, $new_master_host, $new_master_ip, $new_master_port
);
my $vip = '192.168.56.191/24'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig enp0s8:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig enp0s8:$key down";
#my $ssh_Bcast_arp = "arping -c 3 -A 192.168.56.191"; #ARP回复模式，更新邻居。要是不加则服务器会自动等到vip缓存失效，期间VIP会有一定时间的不可用。
my $ssh_Bcast_arp = "arping -c 3 -A 192.168.56.191 -I enp0s8"; #ARP回复模式，更新邻居。要是不加则服务器会自动等到vip缓存失效，期间VIP会有一定时间的不可用
$ssh_user = "root";
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
);
exit &main();
sub main {
print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
if ( $command eq "stop" || $command eq "stopssh" ) {
my $exit_code = 1;
eval {
print "Disabling the VIP on old master: $orig_master_host \n";
&stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
my $exit_code = 10;
eval {
print "Enabling the VIP - $vip on the new master - $new_master_host \n";
&start_vip();
&start_arp();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
exit 0;
}
else {
&usage();
exit 1;
}
}
sub start_vip() {
`ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
sub start_arp() {
`ssh $ssh_user\@$new_master_host \" $ssh_Bcast_arp \"`;
}
sub stop_vip() {
return 0 unless ($ssh_user);
`ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}5、master_ip_online_change脚本
#!/usr/bin/env perl
use strict;
use warnings FATAL =>'all';
use Getopt::Long;
my $vip = '192.168.56.191/24'; # Virtual IP
my $key = "1";
my $ssh_start_vip = "/sbin/ifconfig enp0s8:$key $vip";
my $ssh_stop_vip = "/sbin/ifconfig enp0s8:$key down";
my $exit_code = 0;
my $ssh_Bcast_arp = "arping -c 3 -A 192.168.56.191 -I enp0s8"; #ARP回复模式，更新邻居。要是不加则服务器会自动等到vip缓存失效，期间VIP会有一定时间的不可用。
my (
$command, $orig_master_is_new_slave, $orig_master_host,
$orig_master_ip, $orig_master_port, $orig_master_user,
$orig_master_password, $orig_master_ssh_user, $new_master_host,
$new_master_ip, $new_master_port, $new_master_user,
$new_master_password, $new_master_ssh_user,
);
GetOptions(
'command=s' => \$command,
'orig_master_is_new_slave' => \$orig_master_is_new_slave,
'orig_master_host=s' => \$orig_master_host,
'orig_master_ip=s' => \$orig_master_ip,
'orig_master_port=i' => \$orig_master_port,
'orig_master_user=s' => \$orig_master_user,
'orig_master_password=s' => \$orig_master_password,
'orig_master_ssh_user=s' => \$orig_master_ssh_user,
'new_master_host=s' => \$new_master_host,
'new_master_ip=s' => \$new_master_ip,
'new_master_port=i' => \$new_master_port,
'new_master_user=s' => \$new_master_user,
'new_master_password=s' => \$new_master_password,
'new_master_ssh_user=s' => \$new_master_ssh_user,
);
#my $ssh_Bcast_arp = "arping -c 3 -A 192.168.56.191"; #ARP回复模式，更新邻居。要是不加则服务器会自动等到vip缓存失效，期间VIP会有一定时间的不可用。
exit &main();
sub main {
#print "\n\nIN SCRIPT TEST====$ssh_stop_vip==$ssh_start_vip===\n\n";
if ( $command eq "stop" || $command eq "stopssh" ) {
# $orig_master_host, $orig_master_ip, $orig_master_port are passed.
# If you manage master ip address at global catalog database,
# invalidate orig_master_ip here.
my $exit_code = 1;
eval {
print "\n\n\n***************************************************************\n";
print "Disabling the VIP - $vip on old master: $orig_master_host\n";
print "***************************************************************\n\n\n\n";
&stop_vip();
$exit_code = 0;
};
if ($@) {
warn "Got Error: $@\n";
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "start" ) {
# all arguments are passed.
# If you manage master ip address at global catalog database,
# activate new_master_ip here.
# You can also grant write access (create user, set read_only=0, etc) here.
my $exit_code = 10;
eval {
print "\n\n\n***************************************************************\n";
print "Enabling the VIP - $vip on new master: $new_master_host \n";
print "***************************************************************\n\n\n\n";
&start_vip();
&start_arp();
$exit_code = 0;
};
if ($@) {
warn $@;
exit $exit_code;
}
exit $exit_code;
}
elsif ( $command eq "status" ) {
print "Checking the Status of the script.. OK \n";
`ssh $orig_master_ssh_user\@$orig_master_host \" $ssh_start_vip \"`;
exit 0;
}
else {
&usage();
exit 1;
}
}
# A simple system call that enable the VIP on the new master
sub start_vip() {
`ssh $new_master_ssh_user\@$new_master_host \" $ssh_start_vip \"`;
}
sub start_arp() {
`ssh $new_master_ssh_user\@$new_master_host \" $ssh_Bcast_arp \"`;
}
# A simple system call that disable the VIP on the old_master
sub stop_vip() {
`ssh $orig_master_ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}
sub usage {
print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}6、report_script脚本
#!/bin/bash
echo `hostname` `hostname -i` >> mail.txt
echo `date` >mail.txt
echo "the mha has been switched" >>mail.txt
mail -s "the mha has been switched on `hostname -i` " xxxxxxx@163.com 7、power_manager 防止脑裂脚本
#!/usr/bin/env perl
# Copyright (C) 2011 DeNA Co.,Ltd.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
## Note: This is a sample script and is not complete. Modify the script based on your environment.
use strict;
use warnings FATAL => 'all';
use Getopt::Long;
use Pod::Usage;
use Net::Telnet;
use MHA::ManagerConst;
use MHA::ManagerUtil;
my $SSH_STOP_OK = 10;
my $COMMAND_NOT_SUPPORTED = 20;
my $ILO_ADMIN = 'Administrator';
my $DRAC_ADMIN = 'root';
my $PASSWORD = 'xxx';
my $max_retries = 10;
exit &main();
sub get_power_status_drac_internal {
my $telnet = shift;
my $prompt = shift;
$telnet->print("racadm serveraction powerstatus");
($_) = $telnet->waitfor($prompt);
my $power_state = "void";
my @cmd_out = split /\n/;
# discard command sent to DRAC
$_ = shift @cmd_out;
#strip ansi control chars
s/\e\[(([0-9]+;)*[0-9]+)*[ABCDfHJKmsu]//g;
s/^.*\x0D//;
foreach (@cmd_out) {
s/^\s+//g;
s/\s+$//g;
if (m/^Server power status: (\w+)/) {
$power_state = lc($1);
last;
}
}
return $power_state;
}
sub power_off_drac_internal {
my $telnet = shift;
my $prompt = shift;
$telnet->print("racadm serveraction powerdown");
$telnet->waitfor($prompt);
}
sub power_on_drac_internal {
my $telnet = shift;
my $prompt = shift;
$telnet->print("racadm serveraction powerup");
$telnet->waitfor($prompt);
}
sub login_drac_internal {
my $drac_addr = shift;
my $prompt = '/admin1|\$/';
my $telnet = new Net::Telnet(
Timeout => 10,
Prompt => $prompt,
);
$telnet->open($drac_addr);
$telnet->waitfor('/login/i');
$telnet->print($DRAC_ADMIN);
$telnet->waitfor('/password/i');
$telnet->print($PASSWORD);
$telnet->waitfor($prompt);
return ( $telnet, $prompt );
}
sub power_off_drac {
my $drac_addr = shift;
my $power_status = "void";
local $@;
eval {
my ( $telnet, $prompt ) = login_drac_internal($drac_addr);
power_off_drac_internal( $telnet, $prompt );
$power_status = get_power_status_drac_internal( $telnet, $prompt );
$telnet->close;
};
if ($@) {
warn $@;
}
return $power_status;
}
sub power_on_drac {
my $drac_addr = shift;
my $power_status = "void";
local $@;
eval {
my ( $telnet, $prompt ) = login_drac_internal($drac_addr);
power_on_drac_internal( $telnet, $prompt );
$power_status = get_power_status_drac_internal( $telnet, $prompt );
$telnet->close;
};
if ($@) {
warn $@;
}
return $power_status;
}
sub power_status_drac {
my $drac_addr = shift;
my $power_status = "void";
local $@;
eval {
my ( $telnet, $prompt ) = login_drac_internal($drac_addr);
$power_status = get_power_status_drac_internal( $telnet, $prompt );
$telnet->close;
};
if ($@) {
warn $@;
}
return $power_status;
}
sub power_status_ilo {
my $ilo_addr = shift;
my $power_status = "void";
local $@;
eval {
my $ipmi_out =
`ipmitool -H $ilo_addr -U $ILO_ADMIN -P $PASSWORD -I lanplus power status`;
die
"Failed to get power status from ipmitool. Maybe you need to upgrade ILO firmware version.\n"
if ($?);
chomp($ipmi_out);
if ( $ipmi_out =~ m/^Chassis Power is (\w+)/ ) {
$power_status = lc($1);
}
};
if ($@) {
warn $@;
}
return $power_status;
}
sub power_on_ilo {
my $ilo_addr = shift;
my $power_status = "void";
local $@;
eval {
$power_status = power_status_ilo($ilo_addr);
if ( $power_status ne "off" ) {
die "Power from ipmitool is already on.\n" if ( $power_status eq "on" );
return $power_status;
}
`ipmitool -H $ilo_addr -U $ILO_ADMIN -P $PASSWORD -I lanplus power on`;
$power_status = power_status_ilo($ilo_addr);
};
if ($@) {
warn $@;
}
return $power_status;
}
sub power_off_ilo {
my $ilo_addr = shift;
my $power_status = "void";
local $@;
eval {
$power_status = power_status_ilo($ilo_addr);
if ( $power_status ne "on" ) {
die "Power from ipmitool is already off.\n" if ( $power_status eq "off" );
return $power_status;
}
`ipmitool -H $ilo_addr -U $ILO_ADMIN -P $PASSWORD -I lanplus power off`;
$power_status = power_status_ilo($ilo_addr);
};
if ($@) {
warn $@;
}
return $power_status;
}
sub get_power_status {
my ( $admin_addr, $server_type ) = @_;
my $power_status = "void";
if ( $server_type eq "ilo" ) {
$power_status = power_status_ilo($admin_addr);
}
elsif ( $server_type eq "drac" ) {
$power_status = power_status_drac($admin_addr);
}
return $power_status;
}
sub stop {
my ( $real_host, $admin_addr, $server_type ) = @_;
my $power_status = "void";
if ( $server_type eq "ilo" ) {
$power_status = power_off_ilo($admin_addr);
}
elsif ( $server_type eq "drac" ) {
$power_status = power_off_drac($admin_addr);
}
if ( $power_status eq "off" ) {
print "Power of $real_host was successfully turned off.\n";
return 0;
}
elsif ( $power_status ne "on" ) {
return $COMMAND_NOT_SUPPORTED;
}
my $retry_count = 0;
while ( $retry_count < $max_retries ) {
$power_status = get_power_status( $admin_addr, $server_type );
last if ( $power_status eq "off" );
print
"Waiting until power status becomes 'off'. Current status is $power_status ...\n";
sleep 3;
$retry_count++;
}
if ( $power_status eq "off" ) {
print "Power of $real_host was successfully turned off.\n";
return 0;
}
else {
print
"Power of $real_host was not turned off. Check the host for detail.\n";
return 1;
}
}
sub stopssh {
my ( $ssh_user, $real_host, $real_ip, $pid_file ) = @_;
my $ssh_user_host = $ssh_user . '@';
if ($real_ip) {
$ssh_user_host .= $real_ip;
}
else {
$ssh_user_host .= $real_host;
}
my $command;
my ( $high_ret, $low_ret );
if ($pid_file) {
$command =
"\"if [ ! -e $pid_file ]; then exit 1; fi; pid=\\\`cat $pid_file\\\`; rm -f $pid_file; kill -9 \\\$pid; a=\\\`ps ax | grep $pid_file | grep -v grep | wc | awk {'print \\\$1'}\\\`; if [ \"a\\\$a\" = \"a0\" ]; then exit 10; fi; sleep 1; a=\\\`ps ax | grep $pid_file | grep -v grep | wc | awk {'print \\\$1'}\\\`; if [ \"a\\\$a\" = \"a0\" ]; then exit 10; else exit 1; fi\"";
( $high_ret, $low_ret ) = MHA::ManagerUtil::exec_system(
"ssh $ssh_user_host $MHA::ManagerConst::SSH_OPT_CHECK $command");
if ( $high_ret == $SSH_STOP_OK && $low_ret == 0 ) {
print "ssh reachable. mysqld stopped. power off not needed.\n";
return $high_ret;
}
print "Killing mysqld instance based on $pid_file failed.\n";
}
print "Killing all mysqld instances on $real_host..\n";
$command =
"\"killall -9 mysqld mysqld_safe; a=\\\`pidof mysqld\\\`; if [ \\\"a\\\$a\\\" = \\\"a\\\" ]; then exit 10; fi; sleep 1; a=\\\`pidof mysqld\\\`; if [ \\\"a\\\$a\\\" = \\\"a\\\" ]; then exit 10; else exit 1; fi\"";
( $high_ret, $low_ret ) = MHA::ManagerUtil::exec_system(
"ssh $ssh_user_host $MHA::ManagerConst::SSH_OPT_CHECK $command");
if ( $high_ret == $SSH_STOP_OK && $low_ret == 0 ) {
print "ssh reachable. mysqld stopped. power off not needed.\n";
return $high_ret;
}
else {
print
"ssh NOT reachable. Power off needed (rc1=$high_ret, rc2=$low_ret).\n";
return 1;
}
}
sub start {
my ( $real_host, $admin_addr, $server_type ) = @_;
my $power_status = "void";
if ( $server_type eq "ilo" ) {
$power_status = power_on_ilo($admin_addr);
}
elsif ( $server_type eq "drac" ) {
$power_status = power_on_drac($admin_addr);
}
if ( $power_status eq "on" ) {
print "Power of $real_host was successfully turned on.\n";
return 0;
}
elsif ( $power_status ne "off" ) {
return $COMMAND_NOT_SUPPORTED;
}
my $retry_count = 0;
while ( $power_status ne "on" && $retry_count < $max_retries ) {
$power_status = get_power_status( $admin_addr, $server_type );
last if ( $power_status eq "on" );
print
"Waiting until power status becomes 'on'. Current status is $power_status ...\n";
sleep 3;
$retry_count++;
}
if ( $power_status eq "on" ) {
print "Power of $real_host was successfully turned on.\n";
return 0;
}
else {
print "Power of $real_host was not turned on. Check the host for detail.\n";
return 1;
}
}
sub status {
my ( $real_host, $admin_addr, $server_type ) = @_;
my $power_status = get_power_status( $admin_addr, $server_type );
print "Current power status on $real_host : $power_status\n";
if ( $power_status eq "on" ) {
return 0;
}
elsif ( $power_status eq "off" ) {
return 0;
}
else {
return $COMMAND_NOT_SUPPORTED;
}
}
# If ssh is reachable and mysqld process does not exist, exit with 2 and
# do not power off. If ssh is not reachable, do power off and exit with 0
# if successful. Otherwise exit with 1.
sub main {
my ( $command, $ssh_user, $host, $ip, $port, $pid_file, $help );
GetOptions(
'command=s' => \$command,
'ssh_user=s' => \$ssh_user,
'host=s' => \$host,
'ip=s' => \$ip,
'port=i' => \$port,
'pid_file=s' => \$pid_file,
'help' => \$help,
);
if ($help) {
pod2usage(0);
}
pod2usage(1) unless ($command);
my $rc = 1;
my $ssh_stop_fail = 0;
if ( $command eq "stopssh" || $command eq "stopssh3" ) {
pod2usage(1) unless ($ssh_user);
pod2usage(1) unless ($host);
$rc = stopssh( $ssh_user, $host, $ip, $pid_file );
if ( $rc == $SSH_STOP_OK ) {
exit $rc;
}
else {
exit 1 if ( $command eq "stopssh3" );
$ssh_stop_fail = 1;
}
}
# Get server type (ilo/drac, etc) and administrative IP address.
my ( $admin_addr, $server_type ) = FIXME_xxx( $host, $ip );
if ( $command eq "start" ) {
$rc = start( $host, $admin_addr, $server_type );
}
elsif ( $command eq "stop" || $ssh_stop_fail ) {
$rc = stop( $host, $admin_addr, $server_type );
}
elsif ( $command eq "status" ) {
$rc = status( $host, $admin_addr, $server_type );
}
else {
pod2usage(1);
}
# Do other way to stop host
if ( $rc == $COMMAND_NOT_SUPPORTED ) {
$rc = FIXME_xxx( $command, $host, $ip );
}
if ( $rc == 0 ) {
exit 0;
}
else {
exit 1;
}
}
#############################################################################
=head1 NAME
Main purpose of this command is node fencing so that split brain never happens.
=head1 SYNOPSIS
# power off
power_manager --command=stop --host=master_server
# killing mysqld and mysqld_safe at first. If not successful, forcing power off
power_manager --command=stopssh --host=master_server --ssh_user=root
# killing mysqld and mysqld_safe. If not successful, just exit.
power_manager --command=stopssh3 --host=master_server --ssh_user=root
# killing mysqld with specified pid file. This is useful when you run multiple MySQL instances and want to stop only specified instance
power_manager --command=stopssh --host=master_server --ssh_user=root --pid_file=/var/lib/mysql/mysqld.pid
# power on
power_manager --command=start --host=master_server
# checking power status
power_manager --command=status --host=master_server8、遇到问题
[root@es3 bin]# masterha_check_repl --conf=/root/app1.cnf
Tue Aug 20 10:45:29 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Tue Aug 20 10:45:29 2019 - [info] Reading application default configuration from /root/app1.cnf..
Tue Aug 20 10:45:29 2019 - [info] Reading server configuration from /root/app1.cnf..
Tue Aug 20 10:45:29 2019 - [info] MHA::MasterMonitor version 0.58.
Tue Aug 20 10:45:30 2019 - [info] GTID failover mode = 1
Tue Aug 20 10:45:30 2019 - [info] Dead Servers:
Tue Aug 20 10:45:30 2019 - [info] Alive Servers:
Tue Aug 20 10:45:30 2019 - [info] es1(192.168.56.14:3306)
Tue Aug 20 10:45:30 2019 - [info] es2(192.168.56.15:3306)
Tue Aug 20 10:45:30 2019 - [info] es3(192.168.56.16:3306)
Tue Aug 20 10:45:30 2019 - [info] Alive Slaves:
Tue Aug 20 10:45:30 2019 - [info] es2(192.168.56.15:3306) Version=5.7.24-log (oldest major version between slaves) log-bin:enabled
Tue Aug 20 10:45:30 2019 - [info] GTID ON
Tue Aug 20 10:45:30 2019 - [info] Replicating from 192.168.56.14(192.168.56.14:3306)
Tue Aug 20 10:45:30 2019 - [info] es3(192.168.56.16:3306) Version=5.7.24-log (oldest major version between slaves) log-bin:enabled
Tue Aug 20 10:45:30 2019 - [info] GTID ON
Tue Aug 20 10:45:30 2019 - [info] Replicating from es1(192.168.56.14:3306)
Tue Aug 20 10:45:30 2019 - [info] Current Alive Master: es1(192.168.56.14:3306)
Tue Aug 20 10:45:30 2019 - [info] Checking slave configurations..
Tue Aug 20 10:45:30 2019 - [info] read_only=1 is not set on slave es2(192.168.56.15:3306).
Tue Aug 20 10:45:30 2019 - [info] read_only=1 is not set on slave es3(192.168.56.16:3306).
Tue Aug 20 10:45:30 2019 - [info] Checking replication filtering settings..
Tue Aug 20 10:45:30 2019 - [info] binlog_do_db= , binlog_ignore_db=
Tue Aug 20 10:45:30 2019 - [info] Replication filtering check ok.
Tue Aug 20 10:45:30 2019 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking.
Tue Aug 20 10:45:30 2019 - [info] Checking SSH publickey authentication settings on the current master..
Tue Aug 20 10:45:31 2019 - [info] HealthCheck: SSH to es1 is reachable.
Tue Aug 20 10:45:31 2019 - [info]
es1(192.168.56.14:3306) (current master)
+--es2(192.168.56.15:3306)
+--es3(192.168.56.16:3306)
Tue Aug 20 10:45:31 2019 - [info] Checking replication health on es2..
Tue Aug 20 10:45:31 2019 - [info] ok.
Tue Aug 20 10:45:31 2019 - [info] Checking replication health on es3..
Tue Aug 20 10:45:31 2019 - [info] ok.
Tue Aug 20 10:45:31 2019 - [info] Checking master_ip_failover_script status:
Tue Aug 20 10:45:31 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=es1 --orig_master_ip=192.168.56.14 --orig_master_port=3306
/usr/local/bin/master_ip_failover:行3: use: 未找到命令
/usr/local/bin/master_ip_failover:行4: use: 未找到命令
/usr/local/bin/master_ip_failover:行6: use: 未找到命令
/usr/local/bin/master_ip_failover:行8: 未预期的符号 `newline' 附近有语法错误
/usr/local/bin/master_ip_failover:行8: `my ('
Tue Aug 20 10:45:31 2019 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln229] Failed to get master_ip_failover_script status with return code 2:0.
Tue Aug 20 10:45:31 2019 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln427] Error happened on checking configurations. at /usr/bin/masterha_check_repl line 48.
Tue Aug 20 10:45:31 2019 - [error][/usr/share/perl5/vendor_perl/MHA/MasterMonitor.pm, ln525] Error happened on monitoring servers.
Tue Aug 20 10:45:31 2019 - [info] Got exit code 1 (Not master dead).
MySQL Replication Health is NOT OK!
[root@es3 bin]#原因：文件多了一个空行，这个错误我犯了好多次，哎……
[root@es3 bin]# masterha_check_repl --conf=/root/app1.cnf
Tue Aug 20 10:49:24 2019 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Tue Aug 20 10:49:24 2019 - [info] Reading application default configuration from /root/app1.cnf..
Tue Aug 20 10:49:24 2019 - [info] Reading server configuration from /root/app1.cnf..
Tue Aug 20 10:49:24 2019 - [info] MHA::MasterMonitor version 0.58.
Tue Aug 20 10:49:25 2019 - [info] GTID failover mode = 1
Tue Aug 20 10:49:25 2019 - [info] Dead Servers:
Tue Aug 20 10:49:25 2019 - [info] Alive Servers:
Tue Aug 20 10:49:25 2019 - [info] es1(192.168.56.14:3306)
Tue Aug 20 10:49:25 2019 - [info] es2(192.168.56.15:3306)
Tue Aug 20 10:49:25 2019 - [info] es3(192.168.56.16:3306)
Tue Aug 20 10:49:25 2019 - [info] Alive Slaves:
Tue Aug 20 10:49:25 2019 - [info] es2(192.168.56.15:3306) Version=5.7.24-log (oldest major version between slaves) log-bin:enabled
Tue Aug 20 10:49:25 2019 - [info] GTID ON
Tue Aug 20 10:49:25 2019 - [info] Replicating from 192.168.56.14(192.168.56.14:3306)
Tue Aug 20 10:49:25 2019 - [info] es3(192.168.56.16:3306) Version=5.7.24-log (oldest major version between slaves) log-bin:enabled
Tue Aug 20 10:49:25 2019 - [info] GTID ON
Tue Aug 20 10:49:25 2019 - [info] Replicating from es1(192.168.56.14:3306)
Tue Aug 20 10:49:25 2019 - [info] Current Alive Master: es1(192.168.56.14:3306)
Tue Aug 20 10:49:25 2019 - [info] Checking slave configurations..
Tue Aug 20 10:49:25 2019 - [info] read_only=1 is not set on slave es2(192.168.56.15:3306).
Tue Aug 20 10:49:25 2019 - [info] read_only=1 is not set on slave es3(192.168.56.16:3306).
Tue Aug 20 10:49:25 2019 - [info] Checking replication filtering settings..
Tue Aug 20 10:49:25 2019 - [info] binlog_do_db= , binlog_ignore_db=
Tue Aug 20 10:49:25 2019 - [info] Replication filtering check ok.
Tue Aug 20 10:49:25 2019 - [info] GTID (with auto-pos) is supported. Skipping all SSH and Node package checking.
Tue Aug 20 10:49:25 2019 - [info] Checking SSH publickey authentication settings on the current master..
Tue Aug 20 10:49:26 2019 - [info] HealthCheck: SSH to es1 is reachable.
Tue Aug 20 10:49:26 2019 - [info]
es1(192.168.56.14:3306) (current master)
+--es2(192.168.56.15:3306)
+--es3(192.168.56.16:3306)
Tue Aug 20 10:49:26 2019 - [info] Checking replication health on es2..
Tue Aug 20 10:49:26 2019 - [info] ok.
Tue Aug 20 10:49:26 2019 - [info] Checking replication health on es3..
Tue Aug 20 10:49:26 2019 - [info] ok.
Tue Aug 20 10:49:26 2019 - [info] Checking master_ip_failover_script status:
Tue Aug 20 10:49:26 2019 - [info] /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=es1 --orig_master_ip=192.168.56.14 --orig_master_port=3306
IN SCRIPT TEST====/sbin/ifconfig enp0s8:1 down==/sbin/ifconfig enp0s8:1 192.168.56.191/24===
Checking the Status of the script.. OK
Tue Aug 20 10:49:26 2019 - [info] OK.
Tue Aug 20 10:49:26 2019 - [info] Checking shutdown script status:
Tue Aug 20 10:49:26 2019 - [info] /usr/local/bin/stop_report --command=status --ssh_user=root --host=es1 --ip=192.168.56.14
Tue Aug 20 10:49:26 2019 - [info] OK.
Tue Aug 20 10:49:26 2019 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
[root@es3 bin]#
网站标题：MySQLMHA重要配置
分享URL：http://chengdu.cdxwcx.cn/article/ggpdos.html
